عناصر مشابهة

Evaluation of Completing Horizontal Oil Wells with Inflow Control Devices

تفصيل البيانات البيبلوغرافية
المصدر:مجلة العلوم والدراسات الإنسانية
الناشر: جامعة بنغازي - كلية الآداب والعلوم بالمرج
المؤلف الرئيسي: Abdurrahman, G. (مؤلف)
مؤلفين آخرين: Eljareh, S. (Co-Author)
المجلد/العدد:ع64
محكمة:نعم
الدولة:ليبيا
التاريخ الميلادي:2020
الصفحات:1 - 13
ISSN:2312-4962
رقم MD:1431931
نوع المحتوى: بحوث ومقالات
اللغة:English
قواعد المعلومات:HumanIndex
مواضيع:
رابط المحتوى:
الوصف
المستخلص:إنتاج النفط في الآبار الأفقية يواجه عدة مشاكل أهمها الزيادة الكبيرة في إنتاج المياه المصاحبة حيث يؤثر على إنتاج النفط، العديد من الأجهزة المستخدمة في استكمال الآبار للتقليل والحد من هذه المشكلة. في هذه الدراسة تمت المقارنة في الأداء بين أجهزة التحكم في التدفق العادية والذاتية التشغيل من حيث معدل الإنتاج ونسبة المياه حيث تم بناء نموذج مكمني بواسطة برنامج البترل 2016 يحتوي على بئر أفقي واحد مع تطبيق أنواع مختلفة من الاستكمال وهي الاستكمال المفتوح والاستكمال بواسطة أجهزة التدفق العادية وأجهزة التحكم في التدفق الذاتية. النتائج أظهرت أن استخدام أجهزة التحكم في التدفق الذاتية تسمح بإنتاج كمية أكبر من النفط الخام بالمقارنة مع الأجهزة العادية حيث وصلت نسبة الزيادة في الإنتاج بمعدل 257% باستخدام الأجهزة الذاتية ونسبة المياه خفضت إلى 42% بينما في حال استخدام الأجهزة العادية كانت نسبة الزيادة في الإنتاج 192% ونسبة المياه المنتجة كانت 50% وأظهرت النتائج أيضا أن استخدام أجهزة التحكم في التدفق تزيد الربح الصافي بالمقارنة مع استخدام الاستكمال المفتوح.

Oil production in horizontal wells currently has challenges such as excessive water production, which reduces the cumulative oil recovery, this occurs due to water coning in the reservoir which resulted to earlier water breakthrough in the wellbore. Various Down hole Flow control Devices (DFCs) including ICDs, AICDs, and AICVS are typically installed in the horizontal section of oil wells to mitigate the problem. The study of autonomous ICDs was done by comparing the long term flow performance of such devices against passive ICDs. The study was carried out with a reservoir model representing one horizontal well with three completion alternatives: open hole, ICD, and AICDs which were perforating in numerical reservoir model, these cases were run in the Eclipse simulator and their results were compared with the open hole. The results showed that the installation of Autonomous ICDs (AICDs) allowed producing more oil when compared against using passive ICDs. As it was found in three cases, for well X2, production with AICD increased the overall oil recovery by 257% and reduction of water cut to 42% as compared against an open hole completion, whereas production with ICD increased the overall oil recovery by 192% and reduction of water cut to 50% as compared against an open hole completion. The results proved that the installation of ICDs increased the net revenue comparing to open hole completion.